Enduro Bearings "3002" Double Row Bearing - 15 x 32 x 13 mm
-
Weight : 0.04kg / 0.09lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 36305
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "3002" Double Row Bearing - 15 x 32 x 13 mm is a sealed double row bearing, size 15 x 32 x 13 mm (inner diameter x outer diameter x width). Enduro Bearings builds its bearings with the deepest possible race grooves and the largest balls that fit, plus dual lip seals that run in a groove of the inner race and form a labyrinth against water and dirt. The manufacturer names the following applications: rear hubs, suspension pivots, e.g. Rocky Mountain. The double row design doubles the contact area and takes the flex out of axles and spindles.
Facts: Enduro Bearings "3002" Double Row Bearing - 15 x 32 x 13 mm
- Bearing Size: 3002 (15 x 32 x 13 mm)
- Version: LLU ABEC 3
- Seal: LLU (medium contact dual lip seal)
- Material: 52100 chromium steel (races and balls)
- Fits: rear hubs, suspension pivots, e.g. Rocky Mountain
- Contains: 1 piece
- Extras: deep groove races with the largest possible balls, 90 % grease fill, static load rating per manufacturer 5.68 kN
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
