Enduro Bearings "71802" Angular Contact Bearing - 15 x 24 x 5 mm
- Weight : 0.01kg / 0.02lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 36287
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/enduro-bearings-71802-angular-contact-bearing-15-x-24-x-5-mm-p-36287
Printed: 11/03/2026
Printed: 11/03/2026
The Enduro Bearings "71802" Angular Contact Bearing - 15 x 24 x 5 mm is a sealed angular contact bearing, size 15 x 24 x 5 mm (inner diameter x outer diameter x width). Enduro Bearings builds its bearings with the deepest possible race grooves and the largest balls that fit, plus dual lip seals that run in a groove of the inner race and form a labyrinth against water and dirt. As an angular contact bearing all balls carry the load at once, it can be preloaded and runs without play.
Facts: Enduro Bearings "71802" Angular Contact Bearing - 15 x 24 x 5 mm
- Bearing Size: 71802 (15 x 24 x 5 mm)
- Version: Ceramic Hybrid LLB ABEC 5 or LLB ABEC 5
- Seal:
- Ceramic Hybrid LLB ABEC 5: LLB (light contact dual lip labyrinth seal)
- LLB ABEC 5: LLB (light contact dual lip labyrinth seal) - Material:
- Ceramic Hybrid LLB ABEC 5: ceramic hybrid (chromium steel races, Si3N4 ceramic balls)
- LLB ABEC 5: 52100 chromium steel (races and balls) - Contains: 1 piece
- Extras: deep groove races with the largest possible balls, 90 % grease fill
