Enduro Bearings "BBA-001" MTB Bottom Bracket Preload Adjuster
-
Weight : 0.12kg / 0.26lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 40127
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "BBA-001" MTB Bottom Bracket Preload Adjuster removes play from crank and bottom bracket and preloads angular contact bearings correctly. It is machined from aluminium and comes with two threaded rings for 29 mm DUB and 30 mm spindles; a silicone oval ring holds the inner ring while the outer ring is adjusted, a 2 mm bolt locks everything.
Facts: Enduro Bearings "BBA-001" MTB Bottom Bracket Preload Adjuster
- Material: aluminium, CNC machined; silicone oval ring (red for DUB/29 mm, blue for 30 mm)
- Style: preload adjuster with two threaded rings (29 and 30 mm)
- Axle Diameter: 29 mm (SRAM DUB) and 30 mm
- Scope of Delivery: 1 preload adjuster with two threaded rings and oval rings
- Extras:
- no gluing: pick the matching threaded ring, slide it on, turn the outer adjuster until the play is gone, secure with the recessed 2 mm hex bolt
- only for cranks without integrated threads on the crank arm
- Enduro part number BBA-001
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
