Wolf Tooth "PowerTrac Elliptical" MTB Chainring - SRAM 3-Bolt Direct Mount
-
Weight : 0.07kg / 0.15lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 36497
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
Wolf Tooth "PowerTrac Elliptical" MTB Chainring - SRAM 3-Bolt Direct Mount is the oval version of the Wolf Tooth chainring: 10 percent ovality, the biggest gear 112 degrees after top dead centre, right where your leg has the most power. The patented Drop-Stop profile keeps the chain without a guide, the ring is machined in Minnesota from 7075-T6 aluminium. The largest diameter equals a round ring with two more teeth. This version replaces spider and ring on SRAM 3-bolt direct mount cranks, here with 0mm offset for short spindle BB30 cranks.
Facts: Wolf Tooth "PowerTrac Elliptical" MTB Chainring - SRAM 3-Bolt Direct Mount
- Style: 1x chainring, oval (PowerTrac), Standard 49mm chainline (0mm offset, BB30 short spindle), Drop-Stop B
- Material: 7075-T6 aluminium, CNC machined
- Teeth: 30T or 32T
- Chainring Mount: Direct Mount (SRAM 3-Bolt)
- Chain Compatibility: all 9, 10 and 11 speed chains, 12 speed SRAM Eagle, SRAM T-Type Transmission and Flattop, 12 and 13 speed SRAM Road, 12 speed Campagnolo, Connex, Wippermann; NOT for 12 speed Shimano HG+ and 12 speed KMC
- Contains: 1 chainring
- Extras:
- oval (PowerTrac), 10 percent ovality, timing 112 degrees after top dead centre; largest diameter like a round ring with 2 more teeth, check chainstay clearance
- replaces spider and chainring on SRAM cranks with the 3-bolt direct mount (Cane Creek eeWings too); NOT for SRAM 8-bolt direct mount
- 0mm offset: 49mm chainline on short spindle BB30 cranks
- mounts with the original three bolts (T25)
- the manufacturer recommends a clutch rear derailleur
- weight according to the manufacturer: 30T 68g, 32T 74g
- made in USA
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
