Enduro Bearings "BRT-100" Bearing Puller Set
-
Weight : 1.5kg / 3.31lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 40132
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "BRT-100" Bearing Puller Set pulls bearings that are pressed into a housing, as found in hubs and suspension pivots, out from the inside. The collets expand in the inner race, a slide hammer pulls the bearing out of the bore. The set covers bearings with 8 to 32 mm inner diameter.
Facts: Enduro Bearings "BRT-100" Bearing Puller Set
- Contains: set of expanding pullers (collets) for bearings with 8 to 32 mm inner diameter, slide hammer, in a case according to the manufacturer photo; no bearings
- Material: pullers black oxide coated, plated slide hammer
- Compatibility: pressed in bearings in hubs and suspension pivots, inner diameter 8 to 32 mm
- Extras:
- puller thread: BSW 1/2 inch x 12 TPI (Whitworth)
- single replacement pullers (Enduro Puller) are available
- Enduro part number BRT-100
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
