Enduro Bearings "DRF 2941" Double Row Bearing - 29 x 41/44 x 11 mm
- Weight : 0.03kg / 0.07lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 36317
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/enduro-bearings-drf-2941-double-row-bearing-29-x-4144-x-11-mm-p-36317
Printed: 11/03/2026
Printed: 11/03/2026
The Enduro Bearings "DRF 2941" Double Row Bearing - 29 x 41/44 x 11 mm is a sealed double row bearing, size 29 x 41/44 x 11 mm (inner diameter x outer diameter x width). Enduro Bearings builds its bearings with the deepest possible race grooves and the largest balls that fit, plus dual lip seals that run in a groove of the inner race and form a labyrinth against water and dirt. The versions differ in seal, material and precision grade, see the technical details. The double row design doubles the contact area and takes the flex out of axles and spindles.
Facts: Enduro Bearings "DRF 2941" Double Row Bearing - 29 x 41/44 x 11 mm
- Bearing Size: DRF 2941 (29 x 41/44 x 11 mm)
- Version: Ceramic Hybrid LLB Black Oxide, LLB Black Oxide ABEC 3 or Stainless 2RS
- Seal:
- LLB Black Oxide ABEC 3: LLB (light contact dual lip labyrinth seal)
- Ceramic Hybrid LLB Black Oxide: LLB (light contact dual lip labyrinth seal)
- Stainless 2RS: 2RS (double rubber seal) - Material:
- LLB Black Oxide ABEC 3: 52100 chromium steel (races and balls), black oxide treated races
- Ceramic Hybrid LLB Black Oxide: ceramic hybrid (chromium steel races, Si3N4 ceramic balls), black oxide treated races
- Stainless 2RS: 440C stainless steel (races and balls) - Contains: 1 piece
- Extras: deep groove races with the largest possible balls, 90 % grease fill
