Enduro Bearings Shock Eye Needle Bearing Kit - 6 mm Bolt
- Weight : 0.03kg / 0.07lbs
- Packaging Unit: 1 Set
- Product ID (PID): 40068
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/enduro-bearings-shock-eye-needle-bearing-kit-6-mm-bolt-p-40068
Printed: 10/25/2026
Printed: 10/25/2026
The Enduro Bearings Shock Eye Needle Bearing Kit - 6 mm Bolt replaces the bushing in the eye of a rear shock with a needle bearing. Instead of a sliding bushing the inner race turns on needles, so the shock eye moves more freely and the shock responds more sensitively. The kit is made for a 6 mm mounting bolt, choose the mount width that matches the shock mount of your frame in the variant. One kit covers one shock eye.
Facts: Enduro Bearings Shock Eye Needle Bearing Kit - 6 mm Bolt
- Fits: shock eyes with 15 mm inner diameter and a 6 mm mounting bolt; the mount width has to match the width of the shock mount on the frame
- Version: mount width 15.75 mm, mount width 20.85 mm, mount width 21.85 mm, mount width 21.9 mm, mount width 22.2 mm, mount width 23.9 mm, mount width 24.7 mm, mount width 25.4 mm, mount width 30 mm, mount width 32.4 mm, mount width 33.9 mm or mount width 49.8 mm
- Contains: 1 kit for one shock eye: needle bearing with inner race (steel sleeve 6.01 x 11 mm), plus the seal rings shown on the manufacturer photo
- Part number: Enduro BK-5918, BK-5926, BK-5930, BK-5932, BK-5938, BK-5940, BK-5942, BK-5958, BK-5962, BK-5986, BK-5934, BK-5952
- Extras:
- needle bearing 15 x 12.7 mm (outer diameter x width)
- available mount widths: 15.75, 20.85, 21.85, 21.9, 22.2, 23.9, 24.7, 25.4, 30, 32.4, 33.9, 49.8 mm
- dimensions per manufacturer: inner race 6.01 mm bore, 11 mm outer diameter; overall width = mount width
