Fit Bike Co. "PRK MD" 2023 BMX Bike - Pink
-
Weight : 12.42kg / 27.38lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 24393
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
Fit Bike Co. "PRK MD" 2023 BMX Bike - Pink
comes with a gyro brake system which allows you to spin the bar as often you like without knotting the brake wires. With its 4130 CrMo top- and downtube the
Fit Bike Co. "PRK MD" 2023 BMX Bike - Pink
is the ideal BMX bike for starters of the BMX sport.
Facts: Fit Bike Co. "PRK MD" 2023 BMX Bike - Pink
- Wheel Size: 20"
- BMX Frame:
- 4130 CrMo down-, top- and steerer tube, 1020 HiTen, integrated headset, welded U-brake sockets, Mid-BB
- Top Tube (TT): 20.5"
- Chain Stay (CS): 12.6"
- Head Tube (HA): 75.3°
- Seattube (SA): 71°
- BB-Height (BB): 11.6"
- Standover (SO): 7.25" - BMX Fork: 4130 CrMo 1-1/8" steerer, 1020 HiTen legs, 10mm (3/8") dropouts, 25mm offset
- BMX Bar:
- 1020 HiTen, 2-piece BMX bar
- Height: 8.7"
- Width: 29"
- Backsweep: 11°
- Upsweep: 1°
- Clamping Diameter: 22.2mm - Grips: Fit "Savage" Grips
- Stem: Fit "Forged" Frontload, aluminum, 50mm reach
- Headset: Integrated, sealed bearing
- Gyro: with Gyro
- Brake Lever: Aluminum, 2-finger
- Brake Cable: Slic
- Brake: Aluminum, 990 U-Brake, soft compound brake pads
- Seat: Fit "Barstool" Pivotal, fat padded
- Seat Post: Fit Pivotal, aluminum, 25.4mm
- Seat Clamp: 1-Bolt, aluminum
- Pedals: Platform, nylon
- Chain: KMC "S1"
- Sprocket: Fit "Key", Steel, 25T
- Crank: 3-piece CrMo, 8 Spline 19mm axle, 160mm
- Bottom Bracket: MID BB, sealed bearing
- Hub (front): Fit "S1W", aluminum, 10mm (3/8") CrMo male axle, loose ball, 36H
- Hub (rear): Fit "S1W", Cassette hub, aluminum, sealed bearing, 14mm male axle, 36H, 9T, CrMo, sealed bearing
- Rim (front): 20", Revenge "SW1", single wall, 36H
- Rim (rear): 20", Revenge "SW1", single wall, 36H
- Spokes: Stainless steel 14G, brass nipples
- Tire (front): Fit "OEM" BMX Tire, 65 PSI, 20" x 2.4"
- Tire (rear): Fit "OEM" BMX Tire, 65 PSI, 20" x 2.4"
- Pegs: -
