Formula "Nero C" MTB Fork - 27.5 Inch
-
Weight : 2.85kg / 6.28lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 36761
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Formula "Nero C" MTB Fork - 27.5 Inch is the coil sprung downhill fork by Formula for everybody who wants a fit-and-forget fork for the bike park. The damper is the same as in the Nero R with high and low speed compression and rebound, instead of the 3Air system a coil spring with tool-free preload works inside; the medium spring is fitted from the factory, soft and firm are available as spare parts. The dual crown with 20 mm Boost axle and FIRM Locking System stands on 35 mm stanchions made of 7075 aluminium. Built in Italy with the 10 Year Support Promise.
Facts: Formula "Nero C" MTB Fork - 27.5 Inch
- Wheel Size: 27.5"
- Travel: 200mm
- Axle-to-Crown Height (A-C): 580 mm (+/- 5 mm) at 200 mm travel
- Offset (Rake): 50mm
- Damping: Drop-in cartridge with Internal Floating Technology, high speed compression (20 clicks), low speed compression (12 clicks)
- Spring System: Coil spring, tool-free external preload, medium spring fitted (soft and firm available as spare parts)
- Rebound: Externally adjustable, 21 clicks
- Steerer Tube Diameter: 1-1/8" (28.6mm)
- Crown: Dual crown, hollow forged aluminium, matte black
- Axle Type: 20 x 110 mm Boost, FIRM Locking System thru axle
- Stanchions: 35 mm, 7075 aluminium, hard anodized black
- Lower Legs: Post Mount PM6 (160 mm direct mount)
- Max. Rotor Size: 220 mm
- Recommended Use: Downhill, bike park
- Contains: 1 fork incl. thru axle, medium spring fitted
- Extras: 56 mm offset optional (crown kit), tapered 1.5 inch steerer optional, 10 Year Support Promise, made in Italy
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
