Halo "DJD Supadrive SS" MTB Rear Hub
- Weight : 0.33kg / 0.73lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 43299
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Halo "DJD Supadrive SS" MTB Rear Hub is Halo's dirt jump rear hub with the Supadrive system: 120 points of engagement that handle high torque. The drive runs on a bushing instead of bearings, which saves weight and lasts longer, especially with small cogs. The widely spaced flanges build a stiff wheel, and the hollow aluminium axle has a 6 mm hex so it does not spin while you undo the bolts. Heat treated M10 CrMo bolts and 14 mm adaptors are included, so it fits 135 x 10 or 14 mm dropouts. No cog is included, the DJD cogs come with 9 to 16 teeth. You pick colour and number of holes as options.
Facts: Halo "DJD Supadrive SS" MTB Rear Hub
- Holes: 32H or 36H
- Version: 10 x 135 mm / 6-bolt / Single Speed (DJD cog)
- Disc Mount: 6-bolt
- Points of Engagement: 120 (Supadrive)
- Bearings: sealed (SB), 2 x 6902 cartridge bearings (hub), bushed driver
- Scope of Delivery: 1 rear hub, M10 CrMo bolts, 14 mm adaptors (no cog)
- Extras:
- hollow aluminium axle with 6 mm hex, 135 mm
- matching DJD Supadrive and Bushdrive cogs with 9, 10, 11, 13, 14 and 16 teeth available separately
- centre to flange left 34 mm, right 35 mm
- flange diameter 58 mm
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
