Ikon "Ultralite" BMX Race Rim - 20 Inch (406) - 32H - Disc
- Weight : 0.32kg / 0.71lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 45133
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/ikon-ultralite-bmx-race-rim-20-inch-406-32h-disc-p-45133
Printed: 10/29/2026
Printed: 10/29/2026
The Ikon "Ultralite" BMX Race Rim - 20 Inch (406) - 32H - Disc is Ikon's aluminum rim with 32 holes for 20 x 1.50" to 1.75" Pro race wheels. It is a double wall 6061-T6 aluminum rim, double polished and black anodized, with water transfer graphics. The low aero profile has no brake surface, so the rim is not meant for V-brakes: it works at the front, and at the rear with a disc brake. The nipple holes are slightly angled so the spokes sit straighter in the nipples for a stiffer wheel. Thanks to its bead lock profile the rim is tubeless ready; for that you also need tubeless rim tape, a valve, sealant and a tubeless tire. Ikon recommends at most 7.58 bar (110 psi) and a spoke tension up to 115 kgf.
Facts: Ikon "Ultralite" BMX Race Rim - 20 Inch (406) - 32H - Disc
- Wheel Size: 20"
- Material: 6061-T6 aluminum, double wall, high polished and black anodized
- Holes: 32H
- Width: 28mm outer
- Height (Rim Wall): 19mm
- ETRTO ⌀: 406mm
- ERD: 384.2mm
- Rim Wall: without brake surface (not for rim brakes), front, or rear with a disc brake
- Valve Hole Diameter: for Presta valve
- Extras: 20 x 1.50" to 1.75", tubeless ready, max. 7.58 bar (110 psi), spoke tension up to 115 kgf, angled nipple holes
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
