Loctite "648" Retaining Compound - 5ml
- Weight : 0.03kg / 0.07lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 34356
- Product safety
- Note hazard information
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Loctite "648" Retaining Compound - 5ml does not go into a thread, it goes between a bearing and its seat. When a bottom bracket or a headset cup starts to move in the frame because the fit has worn, this retaining compound fills the gap and turns a loose seat back into a solid joint. It cures without air between the closely fitting metal surfaces and then transmits far higher loads than the fit alone. The bond is high strength, so it is not for parts that get swapped regularly.
Facts: Loctite "648" Retaining Compound - 5ml
- Strength: high strength
- Contains: 1 bottle, 5 ml
- Area of Application: cylindrical metal parts, clearance and press fits, such as a bearing in its seat
- Extras:
- single component, cures without air between closely fitting metal surfaces
- also works on passive materials
- tolerates slight oil residue
- transmits higher loads than the fit alone
Hazard information
Danger
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H318 Causes serious eye damage.
- H335 May cause respiratory irritation.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P261 Avoid breathing spray.
- P273 Avoid release to the environment.
- P280 Wear protective gloves and eye protection.
- P302+P352 IF ON SKIN: Wash with plenty of water.
- P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P501 Dispose of contents/container to an approved waste disposal plant.
