Marzocchi "Bomber Inline" MTB Rear Shock
-
Weight : 0.48kg / 1.06lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 36434
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Marzocchi "Bomber Inline" MTB Rear Shock is for trail riders who do not want to overthink it: a shock that fits the frame, does not break the bank and comes with the least amount of fuss. The inline design without a reservoir fits a wide range of frames, the air valve is easy to reach for the pump, and rebound is adjusted tool-free. The Marzocchi "Bomber Inline" MTB Rear Shock is the natural pairing for the Bomber Z1, Z2 and DJ forks: set your pressure, flick your rebound and go ride.
Facts: Marzocchi "Bomber Inline" MTB Rear Shock
- Eye-to-Eye x Stroke: 165 x 40 mm (Trunnion), 165 x 42.5 mm (Trunnion), 165 x 45 mm (Trunnion), 185 x 50 mm (Trunnion), 185 x 52.5 mm (Trunnion), 190 x 42.5 mm or 190 x 45 mm
- Spring: Air spring (EVOL LV), inline without reservoir
- Damping: Rebound, tool-free, with tunable sweep
- Mounting: Standard (metric) or trunnion, see version
- Hardware: Not included; compatible with FOX bearing mounts on both ends (excluding trunnion)
- Contains: 1 shock
- Extras: Trail rated; travel reducing spacers; air volume spacers available in 0.1 C.I. increments
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
