OneUp Components MTB Rear Hub - Boost 6-Bolt
-
Weight : 0.22kg / 0.49lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 40953
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The OneUp Components MTB Rear Hub - Boost 6-Bolt for 12 x 148 mm Boost rear ends is machined from 7075-T6 aluminium and runs a 44-tooth ratchet that engages every 8.2 degrees. It spins on sealed cartridge bearings (6902 in the hub, 6802 in the freehub) and takes J-bend spokes.
The hub ships without a freehub body: choose the matching body for Shimano Micro Spline or SRAM XD separately. At 220 g it is a light, easy to service base for trail and enduro wheels.
Facts: OneUp Components MTB Rear Hub - Boost 6-Bolt
- Material: Aluminum 7075-T6
- Holes: 28H or 32H
- Version: 12 x 148 mm Boost / 6-bolt / without freehub body
- Disc Mount: 6-bolt
- Points of Engagement: 44 (ratchet, 8.2°)
- Bearings: sealed (SB), 6902 (hub) and 6802 (freehub) cartridge bearings
- Scope of Delivery:
- 1 rear hub (assembled), without freehub body
- 1 x Dumonde Tech Pro X freehub grease - Extras:
- freehub body sold separately: Shimano Micro Spline, SRAM XD
- for J-bend spokes
- PCD 52 mm left, 48 mm right
- flange distance 38 mm left, 23 mm right
- silicone freewheel seal, tool free end caps
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
