Pride Racing "Control V2 Cruiser Disc" Wheelset - 24 Inch (507) - Axles 20/15mm
-
Weight : 2.04kg / 4.5lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 31069
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Pride Racing "Control V2 Cruiser Disc" Wheelset - 24 Inch (507) - Axles 20/15mm is a 24 inch wheel set for the cruiser class in BMX racing. The double wall Control Cruiser rims in 6061-T6 aluminum carry eyelets for high spoke tension, measure 27mm wide at the front and 28mm at the rear, 19mm high, are drilled for Schrader valves and built for disc brakes. The CNC machined Control V2 hubs in 6061-T6 aluminum run on sealed Enduro bearings, take the rotor on an ISO6 mount and engage through 6 pawls and 180 points with almost no free play, which buys you time out of the gate and out of the corners. The hubs are made for thru-axles, 20mm at the front and 15mm at the rear, neither of them included, and the freehub follows the Shimano standard. The rear wheel comes with a lock ring and spacers to set the chain line, rim tape is not included and the manufacturer lists the set at 2037g.
Facts: Pride Racing "Control V2 Cruiser Disc" Wheelset - 24 Inch (507) - Axles 20/15mm
- Wheel Size: 24" (507)
- Rim: Control Cruiser (23-507 front, 24-507 rear)
- Material: 6061-T6 Aluminum, Doublewall
- Brake Type: Disc
- Holes: 36H
- Width: 27mm (front) / 28mm (rear)
- Height: 19mm
- Valve: Schrader
- Tyre width: 28-65mm
- Eyelets for high spoke tension - ETRTO ⌀: 507mm (24")
- Hub: Control V2
- Material: 6061-T6 Aluminum
- Bearing: Sealed Bearings (SB), front Enduro 6805 (25x37x7mm), rear Enduro 18307 (18x30x7mm)
- Driver: Shimano standard (cassette freehub), 7075-T6 aluminum
- Engagement: 180 points / 6 pawls
- Disc mount: ISO6 (6-Loch)
- Spacing: 100mm (front), 110mm (rear)
- CNC machined, high flanges - Axles: 20mm (front), 15mm (rear)
- Holes: 36H
- Weight: 2037g (front wheel 904g, rear wheel 1133g)
- Content: 1 wheel set (front wheel + rear wheel)
- Rear wheel comes with lock ring and spacers to adjust the chain line
- Rim tape not included
- Thru-axles not included (frame specific)
