Pride Racing "Control V2 Driver" BMX Race Freehub Driver
- Weight : 0.08kg / 0.18lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 31153
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The Pride Racing "Control V2 Driver" BMX Race Freehub Driver is the replacement freehub body for the Pride Racing Control V2 cassette hub and brings the freewheel of your hub back to the condition of a new one. It is made from 7075-T6 aluminium and comes complete with pawls, springs and the spacer ring, so you need nothing else to overhaul the hub. Pick the variant by the axle of your hub: the 10mm version runs on an Enduro 6902LLB bearing (15x28x7mm), the 15mm version on an Enduro MR18307 bearing (18x30x7mm). According to Pride, each fits the Control V2 hub with that axle size only.
Facts: Pride Racing "Control V2 Driver" BMX Race Freehub Driver
- Product Type: driver
- Material: 7075-T6 aluminum
- Compatibility: Pride Control V2 cassette hub, only in the axle size of the chosen variant
- 10mm variant: bearing Enduro Bearing 6902LLB (15x28x7mm)
- 15mm variant: bearing Enduro Bearing MR18307 (18x30x7mm) - Content: 1 driver incl. pawls, springs and spacer ring
- Extras: axle size: 10mm or 15mm
