Halo "MXR Supadrive" BMX Race Cassette Hub - 10mm - 32H
- Weight : 0.25kg / 0.55lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 46374
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/halo-mxr-supadrive-bmx-race-cassette-hub-10mm-32h-p-46374
Printed: 11/07/2026
Printed: 11/07/2026
The Halo "MXR Supadrive" BMX Race Cassette Hub - 10mm - 32H is the race cassette hub of Halo's MXR series, for rim brakes. The freehub runs Halo's Supadrive system with 120 points of engagement, which engages almost instantly and, according to Halo, withstands high torque loads. The wide flanges make the wheel stiff, sealed 6902 cartridge bearings give it a long life. It mounts with 3/8" axle bolts at 110mm spacing, the driver takes Shimano HG cogs.
Facts: Halo "MXR Supadrive" BMX Race Cassette Hub - 10mm - 32H
- Holes: 32H
- Axle: 10mm (3/8"), axle bolts (bolt in), 110mm spacing
- Driver: Supadrive, Shimano HG short (Halo spare part "MT-SS / MXRC Driver")
- Bearing: sealed (SB), 2 x 6902
- Extra:
- Supadrive with 120 points of engagement
- centre to flange left 39mm, right 28mm
- spoke hole circle left 45mm, right 52mm
- anodised
- weight: 250g without axle bolts - Content: 1 cassette hub
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
