Pride Racing "Helium Exp 25mm X Control V2" Wheelset - 20 Inch (451) - Axles 10/15mm - Disc
-
Weight : 1.46kg / 3.22lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 31065
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Pride Racing "Helium Exp 25mm X Control V2" Wheelset - 20 Inch (451) - Axles 10/15mm - Disc is a light BMX race wheel set for 20 inch wheels in the 451 format of the Junior and Expert classes. The double wall Helium Expert rims in 6069-T6 aluminum are made with the Arcos System, weigh under 300g, measure 25mm wide and 19mm high, are drilled for Presta valves and suit disc brakes only. The CNC machined Control V2 hubs in 6061-T6 aluminum have high flanges, run on sealed Enduro bearings, take the rotor on an ISO6 mount and engage through a 7075-T6 aluminum driver with 6 pawls and 180 points with almost no free play. The front hub runs a 10mm axle, the rear takes a 15mm thru-axle that is not included, and the freehub follows the Shimano standard. The rear wheel comes with a lock ring and spacers to set the chain line, rim tape is not included and the manufacturer lists the set at 1458g.
Facts: Pride Racing "Helium Exp 25mm X Control V2" Wheelset - 20 Inch (451) - Axles 10/15mm - Disc
- Wheel Size: 20" (451)
- Rim: Helium Exp 25mm (ETRTO 21-451)
- Material: 6069-T6 Aluminum, Doublewall
- Brake Type: Disc
- Holes: 28H
- Width: 25mm
- Height: 19mm
- Valve: Presta
- Tyre width: 20-34mm (20x1-1/8" - 20x1-3/8")
- Manufacturing: Arcos System
- Rim weight under 300g - ETRTO ⌀: 451mm (20")
- Hub: Control V2
- Material: 6061-T6 Aluminum
- Bearing: Sealed Bearings (SB), front Enduro 15267 (15x26x7mm), rear Enduro MR18307 (18x30x7mm)
- Driver: Shimano standard (cassette freehub), 7075-T6 aluminum
- Engagement: 180 points / 6 pawls
- Disc mount: ISO6 (6-Loch)
- Spacing: 100mm (front), 110mm (rear)
- CNC machined, high flanges - Axles: 10mm (front), 15mm (rear)
- Holes: 28H
- Weight: 1458g (front wheel 615g, rear wheel 843g)
- Content: 1 wheel set (front wheel + rear wheel)
- Rear wheel comes with lock ring and spacers to adjust the chain line
- Rim tape not included
- Thru-axles not included (frame specific)
