Pride Racing "Interlock BB86" Bottom Bracket
-
Weight : 0.1kg / 0.22lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 28732
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Pride Racing "Interlock BB86" Bottom Bracket is a bottom bracket for BMX race frames with a BB86 shell (41mm inner diameter, 86mm wide), made for cranks with a 24mm spindle. Unlike a regular pressfit bottom bracket you do not have to press it in: the two cups of CNC-machined 7075-T6 aluminum thread into each other through the shell and are tightened with a Shimano Hollowtech II tool, which works without a press and comes apart just as easily. The wide BB86 shell makes the drivetrain stiffer than a Euro BB, and inside run two sealed annular bearings with four additional seals. The Pride Racing "Interlock BB86" Bottom Bracket weighs 108g and is the entry model of the Interlock range, above it are stainless steel and ceramic bearings.
Facts: Pride Racing "Interlock BB86" Bottom Bracket
- Style: BB86 (pressfit shell, interlock cups)
- Outside diameter: 41mm (BB86)
- Axle Diameter: 24mm
- Bearings: 2 x sealed bearings (sealed annular bearings)
- Extras:
- Model: Pride BB86 Interlock
- Cups: 7075-T6 aluminum, CNC-machined, black anodized
- Interlock: the two cups thread into each other through the shell (Shimano Hollowtech II tool), no press needed
- for frames with BB86 shell only (41mm inner diameter, 86mm width)
- 4 seals
- Weight: 108g
