Pride Racing "Rival Pro" BMX Race Hub Axle - Front - 10mm - CrMo
-
Weight : 0.08kg / 0.18lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 31131
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Pride Racing "Rival Pro" BMX Race Hub Axle - Front - 10mm - CrMo is the front axle for the Pride Racing Rival Pro, Rival Pro SX and Rival Pro Disc hubs, the Rival versions with 10mm (3/8") bolts; according to Pride these hubs run a CrMo axle at the front. The Rival Exp V1 and Exp V2 use M6 bolts with a hollow aluminium or CrMo axle instead and need their own replacement axles. So check the bolt type of your hub first, then use the Pride Racing "Rival Pro" BMX Race Hub Axle - Front - 10mm - CrMo to replace a worn or bent axle with the matching original part.
Facts: Pride Racing "Rival Pro" BMX Race Hub Axle - Front - 10mm - CrMo
- Product Type: axle (front hub)
- Material: CrMo (manufacturer: "Front CrMo Axle")
- Compatibility: Pride Racing Rival Pro, Rival Pro SX, Rival Pro Disc front hub (versions with 10mm (3/8") bolts)
- Thread: inch (3/8"), 10mm (3/8") bolt type
- Content: 1 piece
