Pride Racing "Slik 3.0" BMX Race Fork - 24" Tapered 10mm 3K UD Gloss
-
Weight : 0.52kg / 1.15lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 31117
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Pride Racing "Slik 3.0" BMX Race Fork - 24" Tapered 10mm 3K UD Gloss is Pride Racing's carbon fork for the 24 inch cruiser race bike, built as a monobloc from 100% carbon (Toray T700S x T800S) with a PMI internal structure, which makes it very stiff and durable. The tapered steerer runs from 1-1/8" to 1.5", is 175mm long and must not be cut, the crown race is integrated and the top takes an aluminium compression bolt with an M18x1.5 thread. With 30mm offset and a 10mm (3/8") axle mount it fits classic cruiser hubs. On the track the Pride Racing "Slik 3.0" BMX Race Fork - 24" Tapered 10mm 3K UD Gloss gives you precise steering and direct power transfer.
Facts: Pride Racing "Slik 3.0" BMX Race Fork - 24" Tapered 10mm 3K UD Gloss
- Wheel Size: 24" (507), cruiser
- Material: 100% carbon, Toray T700S x T800S with PMI internal structure, monobloc
- Steerer Tube Diameter: 1-1/8" - 1.5" (28.6mm - 38.1mm)
- Steerer Tube Length: 175mm, non-cuttable
- Top Bolt: M18x1.5mm thread, aluminum
- Dropouts: 10mm (3/8") axle mount
- Offset: 30mm
- Bearing race: Integrated
- Recommended for: BMX Race
- Extras: monobloc construction, non-cuttable steerer tube
