Spank "Spike Race 33" MTB Rear Wheel - 26" Inch
- Weight : 1.12kg / 2.47lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 33244
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/spank-spike-race-33-mtb-rear-wheel-26-inch-p-33244
Printed: 10/20/2026
Printed: 10/20/2026
The Spank "Spike Race 33" MTB Rear Wheel - 26" Inch is the 26 inch rear wheel built around the Spank Spike Race 33 rim. It measures 28mm inside at a profile height of 22mm, which pairs radial compliance for traction with high lateral stiffness. BeadBite bead hooks keep the tyre seated even at low pressure, and tubeless tape and valve are fitted at the factory. It is laced 3-cross onto a Spank hub with the HEX Drive freehub, whose 102 points of engagement and six pawls pick up after 3.5 degrees. The brake rotor mounts on the 6-bolt interface.
Facts: Spank "Spike Race 33" MTB Rear Wheel - 26" Inch
- Wheel Size: 26"
- Version: 12 x 150/157 mm / 6-bolt / SRAM XD or 10 x 135 mm / 6-bolt / Single Speed 11T
- Rim: Spank Spike Race 33, Dynamal alloy, sleeved
- Rim Width: 28mm inner, 33mm outer
- Rim Height: 22mm
- Holes: 32H
- Valve Hole: for Presta valve
- Hub:
- Spank HEX J-Type, HEX Drive with 102 P.O.E., 3.5 degree engagement, 6 pawls
- Spank single speed bolt-on with fixed 11T cog - Hub Bearings: sealed (SB)
- Spokes: J-bend, triple-butted 2.2/1.8/2.0
- Spoke Nipples: brass, external
- Lacing: 3-cross
- Disc Mount: 6-bolt
- Build: handbuilt
- Weight:
- 12 x 150/157 mm / 6-bolt / SRAM XD: 1000g
- 10 x 135 mm / 6-bolt / Single Speed 11T: 1124g - Scope of Delivery: 1 wheel, tubeless tape and valve fitted
- Extras:
- tubeless ready
- BeadBite bead hooks against burping
- OohBah inverted inner wall
- ETRTO 559x28
- ERD 529mm++ (Spank measures without the nipple head, add twice the nipple head height)
- recommended tyre width 1.9" to 2.5"










