SRAM "XX1 / X01 Eagle" Pulley Kit - 12/14 Teeth, Ceramic
-
Weight : 0.03kg / 0.07lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 42548
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The SRAM "XX1 / X01 Eagle" Pulley Kit - 12/14 Teeth, Ceramic is the original replacement for both pulleys of the SRAM XX1 Eagle and X01 Eagle rear derailleurs, mechanical and AXS. A 12 tooth pulley runs on top and a 14 tooth pulley below, both on ceramic bearings.
Facts: SRAM "XX1 / X01 Eagle" Pulley Kit - 12/14 Teeth, Ceramic
- Fits: SRAM XX1 Eagle and X01 Eagle rear derailleurs (12 speed, 50/52 teeth), mechanical and AXS
- Type: upper pulley 12 teeth, lower pulley 14 teeth, ceramic bearings
- Contains: 1 upper pulley 12 teeth, 1 lower pulley 14 teeth
- Extras: manufacturer number 00.7518.103.000
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
