Tange Headset (ZS) - 1-1/8 Inch
-
Weight : 0.08kg / 0.18lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 39898
Found an error? Report it. 5 EUR voucher if confirmed.
The Tange Headset (ZS) - 1-1/8 Inch is a semi-integrated headset for frames with a 44 mm head tube. The cups are pressed in flush, ZS44/28.6 on top and ZS44/30 at the bottom, for a 1-1/8 inch steerer. Both cartridge bearings are sealed and can be replaced individually. Compression ring, seals, top cover, crown race and the stem cap with star nut are included.
Facts: Tange Headset (ZS) - 1-1/8 Inch
- Material: Aluminum
- Size: 1-1/8" (28.6mm), upper ZS44/28.6, lower ZS44/30, semi-integrated
- Bearing: 2 x cartridge bearings, semi-integrated bearing cups
- Scope of Delivery:
- 2 bearing cups
- 2 cartridge bearings
- 1 compression ring
- 2 seals
- 1 top cover
- 1 crown race
- 1 stem cap with star nut - Extras: 44 mm head tube inner diameter, top cover 28.6 mm inner, bearing shells 44 mm outer, crown race seat on the fork 30 mm
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
