Wolf Tooth "Performance" MTB Headset Top Cup - IS41/28.6
-
Weight : 0.05kg / 0.11lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 39422
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Wolf Tooth "Performance" MTB Headset Top Cup - IS41/28.6 is the top half of the Wolf Tooth Performance headset for frames with an integrated headset (IS41: 41 mm bearing seat on top) and a fork with a 1 1/8 inch steerer, machined from 6061 aluminium in Minnesota. Wolf Tooth sells top and lower cups separately, so you replace only the half your frame needs and mix colours freely. Inside is an Enduro black oxide steel bearing with a one year warranty, an O-ring on the steerer and a lip seal over the bearing keep water out. The stem cap with integrated 5 mm spacer, the aluminium bolt and a star nut are included; a carbon steerer needs a compression plug instead of the star nut. The 7 mm top cover gives an 8 mm stack.
Facts: Wolf Tooth "Performance" MTB Headset Top Cup - IS41/28.6
- Material: Aluminum 6061, CNC machined
- Size: 1-1/8" (28.6mm), IS41/28.6 (integrated, 41 mm bearing on top), 7 mm cover = 8 mm stack, cap 45.8 mm outer diameter
- Bearing: Enduro cartridge bearing, black oxide steel, sealed, 36 x 45 degree bevel, 1 year manufacturer warranty
- Scope of Delivery: 1 headset top cup with bearing, stem cap with integrated 5 mm spacer, aluminium bolt, star nut
- Extras:
- O-ring on the steerer and lip seal over the bearing
- star nut for steel and aluminium steerers only, a carbon steerer needs a compression plug
- stem cap bolt torque 2-3 Nm
- top and lower cups sold separately
- matches the Wolf Tooth IS52/40 lower cups
- weight 52 g (manufacturer)
- made in the USA
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
