Wolf Tooth "Premium" MTB Headset Top Cup - IS41/28.6 - 15mm Stack
- Weight : 0.06kg / 0.13lbs
- Packaging Unit: 1 Set
- Product ID (PID): 46298
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/wolf-tooth-premium-mtb-headset-top-cup-is41286-15mm-stack-p-46298
Printed: 11/06/2026
Printed: 11/06/2026
The Wolf Tooth "Premium" MTB Headset Top Cup - IS41/28.6 - 15mm Stack is the tall version of the Wolf Tooth Premium headset top cup for frames with an integrated headset (IS41: 41 mm bearing seat on top) and a fork with a 1 1/8 inch steerer, machined from 6061 aluminium in the USA. The tall cover stacks 15 mm. Wolf Tooth sells top and lower cups separately, so you replace only the half your frame needs and mix colours freely. Inside is an Enduro stainless steel bearing, an O-ring on the steerer and a lip seal over the bearing keep water out. The stem cap, the aluminium bolt and a star nut are included; a carbon steerer needs a compression plug instead of the star nut.
Facts: Wolf Tooth "Premium" MTB Headset Top Cup - IS41/28.6 - 15mm Stack
- Material: Aluminum 6061, CNC machined
- Size: 1-1/8" (28.6mm), IS41/28.6 (integrated, 41 mm bearing on top), 15 mm stack
- Bearing: Enduro stainless steel cartridge bearing, sealed, 36 x 45 degree bevel, lifetime manufacturer warranty
- Scope of Delivery: 1 headset top cup with bearing, stem cap, aluminium bolt, star nut
- Extras:
- O-ring on the steerer and lip seal over the bearing
- star nut for steel and aluminium steerers only, a carbon steerer needs a compression plug
- top and lower cups sold separately
- matches the Wolf Tooth IS52/40 lower cups
- made in the USA
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
