Wolf Tooth "Waveform Performance" MTB Pedals - silver
- Weight : 0.38kg / 0.84lbs
- Packaging Unit: Pair
- Product ID (PID): 36507
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Wolf Tooth "Waveform Performance" MTB Pedals is the more affordable Waveform pedal for trail, enduro and bike park days: the big 122 x 106mm platform is dual concave (16mm at the edge, 13.5mm in the centre), nine steel pins per side load from the rear, the tapered leading edge deflects strikes. Instead of the machined version the body is extruded and post machined aluminium running on a nickel plated chromoly axle with three sealed bearings and an igus bushing.
Facts: Wolf Tooth "Waveform Performance" MTB Pedals
- Material:
- Pedal Body: extruded and post machined aluminium
- Axle: chromoly steel, satin nickel plated
- Pins: steel - Thread Size: 9/16" x 20 tpi
- Bearing: three sealed cartridge bearings and one inboard igus bushing per pedal, radial seal against water and dirt
- Extras:
- 9 pins per side (4.5mm, rear loading), 4 spare pins included
- dual concave, 16mm at the edge, 13.5mm in the centre
- tapered leading edge to deflect strikes
- spare parts and service guide from the manufacturer (Right to Repair) - Width: 106mm
- Length: 122mm
- Height: 16mm
- Scope of Delivery: 1 pair of pedals, 4 spare pins
