Burgtec "Ride Wide Alloy DH" MTB Handlebar - Ø35mm
-
Weight : 0.35kg / 0.77lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 38412
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Burgtec "Ride Wide Alloy DH" MTB Handlebar - Ø35mm is Burgtec's downhill bar with a 35 mm clamp: the same Ride Wide geometry at 800 mm wide with 9° of backsweep and 5° of upsweep, but with more material in the loaded areas. It comes in 15, 22.5 and 30 mm rise with suggested cut down marks printed on. The matching partner is the Direct Mount MK3 stem. 340 g with 15 mm rise, 350 g with 30 mm rise.
Facts: Burgtec "Ride Wide Alloy DH" MTB Handlebar - Ø35mm
- Material: Aluminum
- Bar-Design: 1-piece
- Geometry:
- Width: 31.5"
- Backsweep: 9°
- Upsweep: 5°
- Height: 15mm, 22.5mm or 30mm - Clamping: 35mm
- Contains: 1 piece
- Recommended for: downhill
- Extras:
- 800 mm wide
- more material in the loaded areas than the enduro bar
- suggested cut down marks printed on
- weight 340 g (15 mm rise), 350 g (30 mm rise)
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
