Chromag "BA30" MTB Rim - 29" Inch
-
Weight : 0.62kg / 1.37lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 37673
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Chromag "BA30" MTB Rim - 29" Inch is Chromag's rim for hard hits: 30 mm internal width, a thick bead wall with a wide, rounded top edge against deformation and sidewall cuts, and an internally braced profile that gives the rim torsional stiffness. The spoke bed is oriented to the spoke direction so the spoke does not bend at the nipple. Extruded aluminium, the joint is welded and ground, so no sleeve and no weak spot. 32 holes, tubeless ready, 610 g. For enduro and downhill.
Facts: Chromag "BA30" MTB Rim - 29" Inch
- Wheel Size: 29"
- Material: aluminium, extruded
- Seam: welded and ground
- Holes: 32H
- Width: 30 mm internal, 35 mm external
- Height (Rim Wall): 17 mm
- Valve Hole Diameter: 6.5 mm (Presta valve)
- Contains: 1 rim
- Extras:
- hooked bead, tubeless ready
- internally braced profile
- ETRTO 30-622, ERD 604 mm
- recommended tyre width 2.4" to 2.8"
- max. pressure 3 bar (2.4"), 2 bar (2.8")
- max. spoke tension 125 kgf
- weight 610 g
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
