MRP "Better Boost" MTB Front Hub Conversion Kit - 15x100 to 15x110mm
- Weight : 0.07kg / 0.15lbs
- Packaging Unit: 1 Set
- Product ID (PID): 43346
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
The MRP "Better Boost" MTB Front Hub Conversion Kit - 15x100 to 15x110mm lets you keep your existing 15x100mm front wheel when you upgrade to a 15x110mm Boost fork. The kit consists of two precisely machined end caps and a rotor spacer with bolts, and the wheel does not need to be re-dished.
Available for compatible hubs from DT Swiss, Stan's, Industry Nine, Hope and Chris King. Check your hub before ordering, for DT Swiss by serial number. The Center Lock versions use a post mount adapter and need a rotor 20 mm larger.
Facts: MRP "Better Boost" MTB Front Hub Conversion Kit - 15x100 to 15x110mm
- Fits: compatible 15x100mm front hubs from DT Swiss, Stan's, Industry Nine, Hope and Chris King, converts to 15x110mm Boost forks. DT Swiss 240: not for 240 EXP, only hubs that use the DT Swiss 15mm end cap HWGXXX00S4468S (2011+ 240s CL and 6-bolt with 18mm axle); DT Swiss 350: only hubs that use end cap HWGXXX0004785S; Stan's Neo / Neo OS: same compatibility as Stan's ZH0771 / ZH0776
- Version: Chris King ISO Disc, DT Swiss 240 Oversize (OS), DT Swiss 240, 6-bolt, DT Swiss 240, Center Lock, DT Swiss 350, Center Lock, Hope Pro 2 / Pro 2 Evo / Pro 4, Industry Nine Torch, 6-bolt, Stan's 3.30, 6-bolt or Stan's Neo OS, 6-bolt
- Scope of Delivery: 2 end caps, 1 rotor spacer or post mount adapter on Center Lock versions, bolts
- Extras:
- no wheel re-dishing required
- Center Lock kits: post mount adapter needs a rotor 20 mm larger than the mount (160 mount: 180/183mm rotor, 180 mount: 200/203mm), 160mm rotors not compatible
- check hub compatibility by serial number at DT Swiss or with Stan's technical document
- part number WB-17-5200-CL to WB-17-5207
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
