Cyclus Tools Bottom Bracket Tool with Guide - Shimano Standard
- Weight : 0.91kg / 2.01lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 38986
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/cyclus-tools-bottom-bracket-tool-with-guide-shimano-standard-p-38986
Printed: 11/07/2026
Printed: 11/07/2026
Fitting tool from Cyclus Tools for cartridge bottom brackets with the Shimano standard spline, i.e. BB-UN 51, 71 and 72 and their relatives. The 20 spline head is set into the cup, then the spring loaded locking screw is threaded into the M8x1 thread of the axle. That way Cyclus Tools Bottom Bracket Tool with Guide - Shimano Standard sits firmly on the cup and cannot slip while loosening or tightening, even on seized bearings.
Facts: Cyclus Tools Bottom Bracket Tool with Guide - Shimano Standard
- Contains: 1 fitting tool
- Compatibility: Shimano BB-UN 51, 71 and 72, Shimano Compact, Kinex square taper aluminium, Tecora aluminium, Truvativ Power Spline
- Extras:
- spring loaded locking screw with M8x1 thread holds the tool on the cup
- 20 splines, 32 mm
- replacement spindle available separately
