Cyclus Tools Steerer Tube Saw Guide - 1 and 1 1/8 inch
- Weight : 0.96kg / 2.12lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 38983
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/cyclus-tools-steerer-tube-saw-guide-1-and-1-18-inch-p-38983
Printed: 11/07/2026
Printed: 11/07/2026
Steerer tube clamp from Cyclus Tools for a square cut when shortening the steerer. The clamp is held in a vice, the steerer sits in the matching bushing, and the saw guide keeps the blade exactly at a right angle. The scale on the clamp helps to mark the stack height. Cyclus Tools Steerer Tube Saw Guide - 1 and 1 1/8 inch comes with the bushings for 1 inch and 1 1/8 inch.
Facts: Cyclus Tools Steerer Tube Saw Guide - 1 and 1 1/8 inch
- Contains: 1 steerer tube clamp, bushings for 1 inch and 1 1/8 inch
- Compatibility: 1 inch and 1 1/8 inch steerer tubes
- Extras:
- held in a vice
- scale for the stack height
- not suitable for the Cyclus Tools carbon saw blade (720303)
