Enduro Bearings "MAXHit BSA" MTB Bottom Bracket
-
Weight : 0.12kg / 0.26lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 40058
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Enduro Bearings "MAXHit BSA" MTB Bottom Bracket is Enduro's MAXHit bottom bracket, where bearing and cup are one single part made of 440C stainless steel. Without an aluminium cup there are no mating surfaces that can creak, and there is room for much larger balls, according to the manufacturer more than double the load capacity. It fits BSA threaded shells and in this family is available for Shimano Hollowtech II and other 24 mm cranks, SRAM DUB (29 mm), 30 mm cranks; choose the matching spindle in the variant. Enduro Bearings offers a solution for almost every combination of frame and crank at several price and performance levels, from ABEC-3 to XD-15 ceramic.
Facts: Enduro Bearings "MAXHit BSA" MTB Bottom Bracket
- Material: 440C stainless steel, fully machined and ground; bearing and cup are one part (no aluminium cup)
- Style: BSA thread (English)
- Axle Diameter: 24mm, 29mm or 30mm
- Shell Width: 68 and 73 mm (any BSA shell, spacers included)
- Bearings: MAXHit: the bearing threads directly into the shell, leaving room for larger balls with, according to the manufacturer, more than double the load capacity; double lip groove seals, extra high pressure grease
- Scope of Delivery: 1 bottom bracket (2 MAXHit bearings), seals and spacers; an aluminium preload adjuster and spacers are included according to the manufacturer with BKSM-8132, BKSM-8142
- Extras:
- lifetime manufacturer warranty, requires periodic cleaning and re-greasing
- no aluminium cups and therefore no mating parts that can creak
- installation tools named by the manufacturer: BBT-41x16-24, BBT-036, BBT-001/B, BBT-46x12-29, BBT-46x12-30
- Enduro part numbers: BKSM-8112, BKSM-8132, BKSM-8142
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
