Fiend BMX "Team 2.5pc" BMX Crank
The Fiend BMX "Team 2.5pc" BMX Crank is equipped with a Wedge-system (wedging technique) and a easy to install/remove 2.5-pc. crankset (installation tool not required) with a 22mm CrMo hollow spindle and because of its modern, fully heat treated manufacturing technology very strong and light weight, too. The crank arms of the Fiend BMX "Team 2.5pc" BMX Crank have a rectangular shape with rounded edges and the areas of the spindle and the pedal hole are fully welded around to ensure maximum strength. By tightening or loosening the into the crank arm installed 5mm allen bolt a wedge mechanism at the inside of the crank arm is controlled which presses against the spindle and ensuring a snug fit of the crank arm on the spindle. The Fiend BMX "Team 2.5pc" BMX Crank comes with regular sprocket mounts on both crank arms (25T) which makes it RHD/LHD compatible.
Facts: Fiend BMX "Team 2.5pc" BMX Crank
- Material: 4130 CrMo, heat treated
- Style: 2.5-piece single bolt installation, into crank arms installed Wedge-system, RHD and LHD compatibel
- Crank Arm Length: 175mm
- Axle: 22mm, CrMo hollow spindle, 48 spline, flush mount 8mm CrMo hex bolts
- Extras: Reinforced crank arms, Rectangular arms with rounded edges
Follow us