Fiend BMX "Team V2" BMX Crank
-
Weight : 1.1kg / 2.43lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 21911
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
Fiend BMX "Team V2" BMX Crank
features a 2pc design and Fiend's proprietary internal wedge system in the left arm only to ease installation and removal. Add rectangular shaped heat-treated chromoly crank arms with 1pc spindle/sprocket bosses and a 48 spline 22mm hollow chromoly spindle with a single hollow flush mount spindle bolt for one of the strongest crankset available. Right or left hand drive compatible.
Facts: Fiend BMX "Team V2" BMX Crank
- Material Crank Arms: 4130 CrMo, heat treated
- Material Crank Spindle: 4130 CrMo, heat treated, hollow
- Crank-Type: 2-piece
- Crank Arm Length: 170mm or 175mm
- Spindle Diameter: 22mm
- Spindle-Type: 48-Spline
- possible Sprocket Mount by:
- Bolt-Drive (25T or larger): right (RHD) or left (LHD)
- Spline-Drive: left (LHD) - Pedal Threat: for 9/16"
- Pedal Thread: for 9/16" pedals
- Spindle Bolt: 1x bolt (15x1mm, 22mm Axle) with 8mm allen key
- Sprocket Bolt: 1x bolt (10x1.5mm)(Standard)
- Extras: Fiend's proprietary internal wedge system, completely surround welded axle and pedal jacks, rectangular flattened arms
- Recommended for: Street, Park or Trails
