Magura "Vyron MDS-V3" Dropper Seatpost - 31.6mm
- Weight : 0.74kg / 1.63lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 38473
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/magura-vyron-mds-v3-dropper-seatpost-316mm-p-38473
Printed: 11/03/2026
Printed: 11/03/2026
The Vyron MDS-V3 is Magura wireless dropper post. The bar remote talks over Bluetooth, so there is no cable or housing to route, and the servo motor acts on the command in a fraction of a second. Power comes from replaceable batteries, a CR2 in the post lasts around a year, so there is nothing to charge. There is no bleeding to do, and with an IP67 rating a brief dunking does it no harm.
Facts: Magura "Vyron MDS-V3" Dropper Seatpost - 31.6mm
- Seatsystem: Rail
- Material: aluminium
- Diameter: 31.6mm
- Travel: 100mm or 125mm
- Length:
- 100 mm Hub: 396 mm
- 125 mm Hub: 421 mm - Actuation: wireless bar remote over Bluetooth, clamp or Matchmaker
- Power: CR2 battery in the post, CR2032 in the remote, both replaceable
- Minimum Insertion: 120 mm
- Weight Limit: 120 kg
- Scope of Delivery:
- 1 dropper post
- 1 MDS bar remote
- batteries - Extras:
- IP67 rated, brief submersion is no problem
- no bleeding required, low maintenance
- twin bolt clamp for 7 x 7 mm rails
- 0 mm setback
