Wolf Tooth "ReMote" Dropper Remote Lever
-
Weight : 0.04kg / 0.09lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 39693
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Wolf Tooth "ReMote" Dropper Remote Lever is the standard Wolf Tooth dropper lever: a 21 mm cartridge bearing as the pivot, a machined high-traction paddle, a solidly mounted barrel adjuster and a cable clamp with captive bolt that does not damage the cable. The lever sits close to the bar, the cable is fixed at the lever (UpFront), and the Delrin axle is the engineered failure point that breaks in a crash instead of the lever. The version decides the mounting: on its own 22.2 mm handlebar clamp or directly on the clamp of a Shimano I-Spec II brake. Fits all cable actuated dropper posts; cable and housing are not included.
Facts: Wolf Tooth "ReMote" Dropper Remote Lever
- Type: dropper remote lever
- Material: Aluminum 6061-T6, Delrin axle (engineered failure point)
- Fits: all cable actuated dropper posts; mounting per version: 22.2 mm handlebar clamp (all MTB bars, 1-2 Nm max) or Shimano I-Spec II brake (XTR M9000/M9020, XT M8000/M8020, SLX M7000, Deore M6000)
- Dimensions: lever length 46 mm (pivot to end)
- Contains: 1 remote lever with mounting hardware for the chosen version, without cable and housing
- Extras:
- 21 mm sealed cartridge bearing
- cable clamped at the lever with a captive bolt, cable can be cut and crimped beforehand
- integrated barrel adjuster
- weight 35 g (I-Spec II), 38 g (handlebar clamp), manufacturer
- replacement parts and conversion kits from the manufacturer (Right to Repair)
- made in the USA (65 % or more, manufacturer)
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
