Wolf Tooth "ReMote Light Action" Dropper Remote Lever
-
Weight : 0.04kg / 0.09lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 39635
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Wolf Tooth "ReMote Light Action" Dropper Remote Lever is the Wolf Tooth dropper lever with the 25 percent longer lever arm: it needs about a quarter less force than the standard ReMote and is the choice for posts with a stiff spring or for riders who want a light touch. A 21 mm cartridge bearing guides the lever, the cable is clamped at the lever (UpFront), a solidly mounted barrel adjuster sets the tension, and the Delrin axle is the engineered failure point that breaks in a crash instead of the lever. It mounts directly to the brake clamp: for Shimano I-Spec EV or for Hope Tech 3 brakes, each with the matching hardware. Fits all cable actuated dropper posts; cable and housing are not included.
Facts: Wolf Tooth "ReMote Light Action" Dropper Remote Lever
- Type: dropper remote lever, mounts to the brake clamp
- Material: Aluminum 6061-T6, Delrin axle (engineered failure point)
- Fits: all cable actuated dropper posts (manufacturer recommends among others Thomson, Fox Transfer, Race Face, Easton, 9point8); brake per version: Shimano I-Spec EV (XTR M9100/M9120, XT M8100/M8120, SLX M7100, Deore M6100/M4100) or Hope Tech 3
- Dimensions: lever 25 % longer than the ReMote (57 mm against 46 mm lever length)
- Contains: 1 remote lever with mounting hardware for the chosen brake, without cable and housing
- Extras:
- about 25 % less actuation force than the ReMote
- 21 mm sealed cartridge bearing
- cable clamped at the lever with a captive bolt, cable can be cut and crimped beforehand
- integrated barrel adjuster
- weight 35 g (I-Spec EV) or 36 g (Hope), manufacturer
- replacement parts and service guide from the manufacturer (Right to Repair)
- made in the USA (65 % or more, manufacturer)
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
