OneUp Components "Aluminium" Pedal Bearing Rebuild Kit
-
Weight : 0.06kg / 0.13lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 40973
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The OneUp Components "Aluminium" Pedal Bearing Rebuild Kit contains everything to fully service both OneUp Aluminium flat pedals: outer bearings, brass bushings, seals, axle bolts and end rings. OneUp recommends a service every 50 riding hours.
The brass bushings replace the small cartridge bearings of earlier pedals; the kit fits all OneUp Aluminium pedals.
Facts: OneUp Components "Aluminium" Pedal Bearing Rebuild Kit
- Fits: OneUp Components Aluminium flat pedals (all versions)
- Contains:
- 2 x outer bearing
- 2 x brass bushing
- 2 x outer seal
- 2 x flange washer
- 1 x axle bolt left, 1 x axle bolt right
- 2 x axle O-ring
- 1 x end ring left, 1 x end ring right - Extras:
- for both pedals
- also needed: cassette lockring tool (e.g. Shimano TL-LR10), 8 mm and 2.5 mm hex keys, grease
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
