OneUp Components "EDC Tap" Steerer Tap Kit
-
Weight : 0.16kg / 0.35lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 40962
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The OneUp Components "EDC Tap" Steerer Tap Kit prepares an aluminium steerer for the EDC Top Cap: pull the star nut, check the steerer with the go/no-go gauge and cut the thread with the tap and its guide. The fork stays in the bike.
Facts: OneUp Components "EDC Tap" Steerer Tap Kit
- Contains:
- 1 x star nut puller
- 1 x go/no-go gauge
- 1 x tap
- 1 x tap guide - Compatibility: EDC Top Cap
- steerer: aluminium, round, 1-1/8" - 1.5" tapered, length 183 - 230 mm, star nut bore 24.25 - 24.80 mm
- not for carbon or steel steerers - Extras:
- no need to remove the fork
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
