Premium "2PC" BMX Crank
-
Weight : 0.77kg / 1.7lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Set
- Product ID (PID): 6564
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
If you want the finest quality in your crank, you should get increase the
Premium "2PC" BMX Crank.
Thanks to the CrMo material, the two-part design and the heat treatment by the
Premium "2PC" BMX Crank,
possible breakage points are reduced and therefore ensure high stability.
Facts: Premium "2PC" BMX Crank
- Material crank arms: 4130 CrMo, heat-treated
- Crank axle material: 4130 CrMo, heat-treated
- Crank-Type: 2-piece
- Crank type: 2-piece
- Spindle Diameter: 22mm
- Spindle-Type: 48-Spline
- Crank arm length: 175mm
- Crank axle diameter: 22mm
- Crank axle type: 48-Spline
- possible chainring attachment via:
- Micro-Bolt-Drive (smaller than 25T): right (RHD) and left (LHD)
- Bolt-Drive (25T or larger): right (RHD) and left (LHD) - Pedal thread: for 9/16" pedals
- Crank screw: 1x screws 15x1mm with 8mm hexagon socket
- Chainring screw: 1x screw (10x1.5mm)(Standard), 1x screw (8x1.25mm)(Micro-Drive)
- Extras: Welded axle and pedal bushings on crank arms
- recommended for: Street, Park or Trails
