Pride Racing "6804-2RS Bearings" BMX Race Hub Bearings - 20x32x7mm
- Weight : 0.08kg / 0.18lbs
- Packaging Unit: Pair
- Product ID (PID): 31161
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/pride-racing-6804-2rs-bearings-bmx-race-hub-bearings-20x32x7mm-p-31161
Printed: 10/19/2026
Printed: 10/19/2026
The Pride Racing "6804-2RS Bearings" BMX Race Hub Bearings - 20x32x7mm are two deep groove ball bearings of the 6804 series with steel cage and steel balls, closed on both sides with a 2RS seal that keeps dirt out and the grease in. With 20mm inner diameter, 32mm outer diameter and 7mm width they fit, according to Pride, the Fusion rear hub with 10mm or 15mm axle and the Matrix front hub with 20mm axle. The Pride Racing "6804-2RS Bearings" BMX Race Hub Bearings - 20x32x7mm come as a pair, so you can renew both sides of the hub in one go.
Facts: Pride Racing "6804-2RS Bearings" BMX Race Hub Bearings - 20x32x7mm
- Product Type: bearing
- Material: steel (cage and balls), 2RS seal (one seal per side)
- Compatibility: Pride Fusion rear hub (10mm and 15mm axle), Pride Matrix front hub (20mm axle)
- Dimensions (d x D x W): 20 x 32 x 7mm
- Content: 1 pair (2 pieces)
- Extras: bearing series: 6804-2RS
