Pride Racing "Control V1 Disc" Wheelset - 20 Inch (406) - Axles 20/10mm - Black/Red
-
Weight : 1.73kg / 3.81lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 31063
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Pride Racing "Control V1 Disc" Wheelset - 20 Inch (406) - Axles 20/10mm - Black/Red is a BMX race wheel set for 20 inch wheels in the 406 format of the Pro class, with black rims and red hubs. The double wall Control Pro rims in 6061-T6 aluminum are 27mm wide at the front and 28mm at the rear, 19mm high, reinforced with eyelets for high spoke tension, drilled for Schrader valves and built for disc brakes. The CNC machined Control V1 hubs in 6061-T6 aluminum run on sealed Enduro bearings, take the rotor on a Centerlock mount and engage through 6 pawls and 180 points with almost no free play. The front hub is made for a 20mm thru-axle that is not included, the rear runs a 10mm axle with female bolts and the freehub follows the Shimano standard. The rear wheel comes with a lock ring and spacers to set the chain line, rim tape is not included and the manufacturer lists the set at 1730g.
Facts: Pride Racing "Control V1 Disc" Wheelset - 20 Inch (406) - Axles 20/10mm - Black/Red
- Wheel Size: 20" (406)
- Rim: Control Pro (23-406 front, 24-406 rear)
- Material: 6061-T6 Aluminum, Doublewall
- Brake Type: Disc
- Holes: 36H
- Width: 27mm (front) / 28mm (rear)
- Height: 19mm
- Valve: Schrader
- Tyre width: 28-65mm
- Eyelets for high spoke tension - ETRTO ⌀: 406mm (20")
- Hub: Control V1
- Material: 6061-T6 Aluminum
- Bearing: Sealed Bearings (SB), front Enduro 6805 (25x37x7mm), rear Enduro 6902 (15x28x7mm)
- Driver: Shimano standard (cassette freehub), 7075-T6 aluminum
- Engagement: 180 points / 6 pawls
- Disc mount: Centerlock
- Spacing: 100mm (front), 110mm (rear)
- CNC machined, high flanges - Axles: 20mm (front), 10mm (rear)
- Rear: 10mm axle with female bolts - Holes: 36H
- Weight: 1730g (front wheel 778g, rear wheel 952g)
- Content: 1 wheel set (front wheel + rear wheel)
- Rear wheel comes with lock ring and spacers to adjust the chain line
- Rim tape not included
- Thru-axles not included (frame specific)
