Reverse Components "Steerer Clamp" MTB Headset Spacer - 10mm
-
Weight : 0.02kg / 0.04lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 33080
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Reverse Components "Steerer Clamp" MTB Headset Spacer - 10mm is a 10 mm spacer with an extra clamping bolt. It goes directly under the stem in place of a normal spacer and clamps the steerer tube there. That keeps the headset tight even where it likes to work loose. In daily use the clamp helps in two places: the handlebar can be turned sideways for transport without the headset developing play, and in the work stand the fork does not drop out once the stem is off. For bike cases and air travel that is the difference between stripping the bike down and simply turning the bar.
Facts: Reverse Components "Steerer Clamp" MTB Headset Spacer - 10mm
- Contains: 1 spacer with clamp, 1 clamping bolt
- Material: Aluminum
- Size: 1-1/8" (Ø28.6mm), 10 mm height
- Extras: clamps the steerer tube, keeps the headset free of play and the fork in the work stand
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
