SE Bikes "Colossal Ripper 32" BMX Cruiser Bike - 32 Inch - High Polish Silver
-
Weight : 17.5kg / 38.58lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 34095
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
SE Bikes "Colossal Ripper 32" BMX Cruiser Bike - 32 Inch - High Polish Silver
rolls on 32 inch wheels and is the biggest bike in the SE line-up. Its 6061 aluminum Floval tubing frame with looptail rear end and internal cable routing carries a Shimano MT200 hydraulic disc brake with a 180 mm rotor at the front and at the rear. The 4-piece Colossal cruiser bar with its 8.25 inch rise and the S-1E grips put you in a relaxed, upright position. If you want to stand out while raising it up, the
SE Bikes "Colossal Ripper 32" BMX Cruiser Bike - 32 Inch - High Polish Silver
is your bike.
Facts: SE Bikes "Colossal Ripper 32" BMX Cruiser Bike - 32 Inch - High Polish Silver
- Wheel Size: 32"
- BMX Frame: 6061 Aluminum Floval Tubing, Internally-machined Integrated Head Tube, Stiff SE Bubble BB Yoke, Looptail Rear End, Internal Cable Routing, Disc Tabs, 68mm American Bottom Bracket, Wide Rear Stays, Retro Dropouts
- Frame-Geometry:
- Top Tube (TT): 24.7"
- Chain Stay (CS): 18.9"
- Head Tube (HA): 70°
- Seat Tube (SA): 71°
- Seat Tube, Center To Top: 16.9"
- BB Height: 13.7"
- Standover (SO): 32.7"
- Wheelbase (WB): 46" - BMX Fork: SE "Landing Gear", Full Cr-Mo, Disc Tabs
- BMX Bar:
- Properties: SE "Colossal" 4pc Cr-Mo Cruiser Bar
- Height: 8.25"
- Width: 28.5"
- Backsweep: 10°
- Upsweep: 1° - Grips: SE "S-1E" Dual-Ply, Sleeved Grips w/ Strong Hold Knurling, Raised SE Bubble Tread, BMX Innovations End Cap
- Stem: Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm reach
- Headset: FSA "Orbit CE", Integrated, 1-1/8", Sealed Bearing
- Gyro: -
- Brake Lever: Shimano MT200, 2/3-Finger, Mineral Oil, front & rear
- Brake (Front): Shimano MT200, Hydraulic Disc, Dual Piston, 180mm Rotor
- Brake (Rear): Shimano MT200, Hydraulic Disc, Dual Piston, 180mm Rotor
- Seat: SE "Captive" Seat, concave design for ultimate hold, w/ Custom SE Bottle Opener Brace
- Seat Post: Micro-Adjust, Aluminum, 27.2mm
- Seat Clamp: SE Racing "Champ Clamp", Aluminum, 31.8mm
- Pedals: X-Pedo Low-profile Platform w/ Removable Pins
- Chain: KMC "S1"
- Sprocket: SE Racing, Alloy, 36T
- Crank: SE "V-Ridge", 3-piece, Cr-Mo, 170mm, 19mm spindle, 160mm spindle length
- Bottom Bracket: American BB, 68mm, Sealed Bearing
- Hub (front): Alloy, 100mm, nutted, 36H
- Hub (rear): Alloy, 135mm, Sealed Bearing, disc, 36H, 19T freewheel, 38 clicks
- Rim (front): Aluminum, double wall disc rim, 36H, stainless spokes
- Rim (rear): Aluminum, double wall disc rim, 36H, stainless spokes
- Tire (front): SE "Bozack", Street-Proven Multi-Purpose Compound, Wrap-Around Urban Tread Pattern, with Grooved SE Wing Logo, 32" x 2.4"
- Tire (rear): SE "Bozack", Street-Proven Multi-Purpose Compound, Wrap-Around Urban Tread Pattern, with Grooved SE Wing Logo, 32" x 2.4"
- Extras: SE Racing Padset, Alloy Valve Caps, SE Chain Tensioners
- Delivery: The BMX bike comes pre-assembled in a box. For final assembly, only the handlebar, front wheel, pedals, and saddle need to be installed. Tools are not included.
- Usage: BMX Cruiser with 32 inch wheels, built for cruising with real BMX feeling, perfect for wheelies and long distances on the road.
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
