Syndyt BMX Race Dropout Adapter Set
- Weight : 0.04kg / 0.09lbs
- Packaging Unit: 1 Set
- Product ID (PID): 45280
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/syndyt-bmx-race-dropout-adapter-set-p-45280
Printed: 10/29/2026
Printed: 10/29/2026
The Syndyt BMX Race Dropout Adapter Set lets you run a rear wheel with a smaller axle in Syndyt SYB frames. On each side an axle sleeve made of 6061 aluminium sits in the dropout and houses the axle bolt of the hub. A stainless steel flange washer sits between hub and frame and locates inside the sleeve, for a rigid connection and a clean look.
Choose your frame size and the axle diameter of your hub: Pro frames (20mm dropouts) with 10mm or 15mm axle, Expert frames (15mm dropouts) with 10mm axle. The frames come with these adaptors, here you get them as a spare.
Facts: Syndyt BMX Race Dropout Adapter Set
- Material: axle sleeves 6061 aluminum, flange washers stainless steel
- Axle Size: 10mm or 15mm
- Compatibility:
- Pro: Syndyt SYB Pro frames (SYB 204 to SYB 225, 20mm dropouts), to 10mm or 15mm axle
- Expert: Syndyt SYB Expert frames (SYB 175 to SYB 200, 15mm dropouts), to 10mm axle - Content: 1 set (2 axle sleeves, 2 flange washers)
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
