wethepeople "Envy Carbonic LHD" BMX Bike - Matte Black - LHD
-
Weight : 10.81kg / 23.83lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 25735
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The
wethepeople "Envy Carbonic LHD" BMX Bike - Matte Black - LHD
takes the legendary wethepeople "envy" BMX bike and gives it one of the most progressive and game changing technical upgrades ever seen on a complete. Now rolling on the eclat "carbonic" carbon fibre rims and with a slick stealth black makeover, the
wethepeople "Envy Carbonic LHD" BMX Bike - Matte Black - LHD
begins the dawn of a new era in BMX design. Fully laden with only the very best parts from eclat including the eclat "Storm XLT" fork, Mirage Tires and ground-breaking Seismic hubs, the
wethepeople "Envy Carbonic LHD" BMX Bike - Matte Black - LHD
sacrifices no investment. A BMX bike which is set to turn heads and spark intrigue wherever it goes, you’re going to have a hard time deciding if you want to put it in a display case or push it to the absolute limit.
Note: The BMX bike comes with preassembled rear brake (U-Brake)
Note: The BMX bike comes with preassembled rear brake (U-Brake)
Facts: wethepeople "Envy Carbonic LHD" BMX Bike - Matte Black - LHD
- Wheel Size: 20"
- BMX Frame:
- wethepeople "Envy XLT", 4130 CrMo, hydroformed gussets, lasercut 6.0mm, 120mm head tube
- Top Tube (TT): 20.5" or 21.0"
- Chain Stay (CS): 12.5" (12.5"-13.35")
- Head Tube (HA): 75.25°
- Seattube (SA): 71.5°
- BB-Height (BB): 11.7"
- Standover (SO): 8.75" - BMX Fork: eclat "Storm XLT", 1-1/8", 100% Sanko 4130 CrMo, heat treated, CNC machined 1-piece steerer tube, aluminum topbolt, 24mm offset
- BMX Bar:
- wethepeople "Envy XLT", 100% 4130 Sanko CrMo, 2-piece, 25.4mm tube diameter
- Height: 9.4"
- Width: 29.8"
- Backsweep: 10.5"
- Upsweep: 2.5°
- Clamping Diameter: 25.4mm - Grips: eclat "Shogun" Grips, eclat "Tech-Bolt" barends
- Stem: eclat "Dune", topload, CNC machined, 50mm Offset, 25.4mm handlebar mount diameter
- Headset: wethepeople "Compact", integrated headset, sealed bearing
- Gyro: -
- Gyro compatible: Yes
- Brake Lever: eclat "Sniper", aluminum, hinged, 2-finger
- Brake: eclat "Talon" U-brake, aluminum, with bridge cable
- Seat: eclat "Bios", Pivotal, fat-padded
- Seat Post: eclat "Torch", Pivotal, aluminum, 230mm, 25.4mm
- Seat Clamp: Integrated
- Pedals: eclat "Contra", plastic
- Chain: wethepeople "Demand", K1 type
- Sprocket: eclat "Abyss", 6061-T6 aluminum, CNC machined, 25T
- Crank: eclat "Tibia", LHD, 4130 CrMo, 2.5-piece, 48 Spline 22mm spindle, 170mm
- Bottom Bracket: eclat "CNC", Mid BB, 22mm, sealed bearing
- Hub (front): eclat "Seismic", sealed bearing, female axle with 10mm (3/8") CrMo bolts, 36H, incl. 2 x eclat Nylon Hubguard
- Hub (rear): eclat "Seismic", cassette hub, LHD, sealed bearing, female CrMo axle with 12mm CrMo bolts (for 14mm dropouts), 36H, incl. 2 x eclat Nylon Hubguard, 9T LHD
- Rim (front): eclat "Carbonic", "Toryca" carbon, 37mm wide, double wall, 36H
- Rim (rear): eclat "Carbonic", "Toryca" carbon, 37mm wide, double wall, 36H
- Tire (front): eclat "Mirage" BMX tire, 20" x 2.45"
- Tire (rear): eclat "Mirage" BMX tire, 20" x 2.45"
- Pegs: -
