Wolf Tooth "CAMO" Direct Mount Spider - Race Face Cinch
- Weight : 0.03kg / 0.07lbs
- Packaging Unit: 1 Piece
- Product ID (PID): 36502
- Product safety
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.
Source: BMX Glossary
Found an error? Report it. 5 EUR voucher if confirmed.
Online: https://www.kunstform.org/en/wolf-tooth-camo-direct-mount-spider-race-face-cinch-p-36502
Printed: 11/02/2026
Printed: 11/02/2026
Wolf Tooth "CAMO" Direct Mount Spider - Race Face Cinch is the carrier of the CAMO system: it stays on the crank, the CAMO chainring goes on with five small bolts and no nuts and can be swapped without removing the spider. The letter and number in the name say which way and how far the teeth are offset from the mounting face, so the chainline is right for a standard or Boost rear end. Machined in Minnesota, the five stainless steel bolts are included, a chainring is not.
Facts: Wolf Tooth "CAMO" Direct Mount Spider - Race Face Cinch
- Content: 1 CAMO spider with 5 stainless steel bolts, no chainring
- Material: 7075-T6 aluminium, CNC machined
- Style: M5 Boost, 52mm chainline (3mm offset)
- Chainring Mount: Wolf Tooth CAMO
- Extras:
- for every Race Face Cinch crank; M8 for 135mm QR and 142mm thru axle, M5 for 148mm Boost
- takes every Wolf Tooth CAMO chainring (round or oval, aluminium or stainless steel), ring swap with five bolts and no nuts
- torque 4-5Nm with medium strength threadlocker
- not compatible with ISCG05 bash guides
- weight according to the manufacturer: M8 32g, M5 28g
- made in USA
