Chromag "Fubar Cutlass Carbon" MTB Bar - Ø31.8mm
-
Weight : 0.25kg / 0.55lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 37633
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Chromag "Fubar Cutlass Carbon" MTB Bar - Ø31.8mm is Chromag's carbon bar with a 31.8 mm clamp: 800 mm wide, 9° backsweep, 5° upsweep, in 25 or 35 mm rise. According to Chromag a revised layup and moulding process gives stiffness and fatigue figures the Zedler Institute measured above the ISO standard, and the Cutlass has more backsweep than its predecessor. Chromag recommends mounting it with one of its own stems; bar ends are not intended. At 247 g a light bar for enduro, downhill and all mountain.
Facts: Chromag "Fubar Cutlass Carbon" MTB Bar - Ø31.8mm
- Material: Carbon
- Bar-Design: 1-piece
- Geometry:
- Width: 31.5"
- Backsweep: 9°
- Upsweep: 5°
- Height: 25mm or 35mm - Clamping: 31.8mm
- Contains: 1 piece
- Recommended for: enduro, downhill, all mountain
- Extras:
- width 800 mm
- premium unidirectional carbon weave
- revised layup and moulding process, load figures above ISO standard according to the Zedler Institute
- more backsweep than the previous model
- Chromag recommends pairing with a Chromag stem, not for bar ends
- weight 247 g (manufacturer figure)
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
