Chromag "Fubars FU40 / FU50" MTB Bar - Ø31.8mm
-
Weight : 0.33kg / 0.73lbs
Weight
The heaviness of a BMX part, measured by weighing. It's worth noting that weight specifications for BMX parts can vary and may not always be precise. Several factors contribute to this:Manufacturer's weight specifications may be inaccurate or incomplete.The weight of two identical parts can also differ.We cannot weigh every individual part.For example, if there are handlebars in different heights, the manufacturer usually provides just one weight specification for all heights. When weighing two identical tires, you might get two different results.Source: BMX Glossary
- Packaging Unit: 1 Piece
- Product ID (PID): 37634
- Product safety
Found an error? Report it. 5 EUR voucher if confirmed.
The Chromag "Fubars FU40 / FU50" MTB Bar - Ø31.8mm are Chromag's high-rise aluminium bars with a 31.8 mm clamp: 800 mm wide, 8° backsweep, 5° upsweep, as FU40 with 40 mm or as FU50 with 50 mm rise. The bar is drawn from 7050 aluminium and heat treated, and the high rise lifts the front end without stacking spacers or fitting a steep stem. Chromag recommends mounting it with one of its own stems; bar ends are not intended. Suits dirt, trail and enduro bikes that want a tall front end.
Facts: Chromag "Fubars FU40 / FU50" MTB Bar - Ø31.8mm
- Material: Aluminum
- Bar-Design: 1-piece
- Geometry:
- Width: 31.5"
- Backsweep: 8°
- Upsweep: 5°
- Height: 40mm or 50mm - Clamping: 31.8mm
- Contains: 1 piece
- Recommended for: all mountain, enduro, downhill, dirt
- Extras:
- width 800 mm
- FU40 with 40 mm rise, FU50 with 50 mm rise
- 7050 aluminium, drawn and heat treated
- Chromag recommends pairing with a Chromag stem, not for bar ends
- weight 330 g (manufacturer figure, FU40)
These details come from manufacturer and supplier data. Found an error? Report it, there is a 5 EUR voucher for every confirmed error.
